Eurotool's Wire Twisting Plier PLR-799.50

We use a lot of twisted wire. We discovered that if we twisted it, we got better, cleaner results, and saved money. This wire twister is easy to use and a good value. This is what we use.

We would very much like to be your supplier of tools. We offer competitive prices and reasonable shipping. Also, we are just getting started, so we have the time to offer advice and to provide prompt service. Between email and our forums, we can answer question and help with our products and services.

See more PayPal information below.

Click to enlarge.

Wire Twisting Pliers PLR-799.50

This is Eurotool's 6" Wire Twisting Plier(despite the fact that it is 8.5" long). It is easier to handle, and a lower price, than their 9 inch tool. Simple, one-pull action twists wire quickly into a strand that will not unravel. Hardened and tempered. This tool was designed to twist wires that held on important items, like filters on airplane engines. It is ideal for twisting wires for jewelry making.

Take a section of wire, say 4 feet long. Loop the middle of the wire around a hook and clamp the two ends in these pliers. There is a chrome sliding mechanism in the middle that locks the tool closed. You grab the rear knob, release the pliers and pull. The pliers spin, twisting the wires. Regrip the pliers and release the knob, which automatically returns. Keep this up until you have the desired amount of twist. You can get consistent results if you measure your wire and count the number of pulls. If you like a very tight twist, which work hardens the metal, you may need to anneal the wire before using it for tight turns. If you need to twist just a few inches of a single wire, use a pin vise instead.